Keywords:

Product News
1701329-950 3/4 gear seat 1701328-950 3/4 gear sleeve

1701329-950 3/4 gear seat 1701328-950 3/4 gear sleeve

1. What are the three types of synchronizers: Synchronizers are of atmospheric type, inertial type and self-energizing type. 2. Function: When the adjacent gears are converted to each other, the principle that different operation steps should be taken is also applicable to the shifting of moving gears, but the rotational angular speed requirements of the ring gear to be engaged and the engagement sleeve of the former are the same, while that of the latter to be engaged The linear speed requirements of the gear meshing point are the same, but the speed analysis principle is the same. The shifting operation of the transmission, especially the shifting operation from a high gear to a low gear, is complicated, and it is easy to produce the impact between the gear teeth or the spline teeth. In order to simplify operation and avoid inter-tooth impact, a synchronizer can be provided in the gear shifter. The inertial synchronizer is synchronized by friction, and a special mechanism is provided on it to ensure that the engaging sleeve and the spline gear ring to be engaged cannot be in contact before synchronization is achieved, thereby avoiding inter-tooth impact.

Keywords:

synchronizer