• 1(11).jpg
1(11).jpg
+

1701357-950 1/2gear seat

The working principle is as follows: 1. (1) The input shaft and output shaft of the transmission rotate at different speeds. When changing gears, the two gears rotate at different speeds. The gears collide with each other, thus damaging the gears. (2) The shift of the old transmission should adopt the "two-foot clutch" method. When shifting, first step on the clutch, pull the gear out to neutral, release the clutch, stay in the neutral position for a while, and then step on the clutch again. , put the block into another block.

Keywords: synchronizer, gear sleeve

Category:

New product

E-mail

jiangsuzhuiri@126.com

E-mail

zr@jszrtbq.com

Messages
Product
  • Description

  • The working principle is as follows: 1. (1) The input shaft and output shaft of the transmission rotate at different speeds. When changing gears, the two gears rotate at different speeds. The gears collide with each other, thus damaging the gears. (2) The shift of the old transmission should adopt the "two-foot clutch" method. When shifting, first step on the clutch, pull the gear out to neutral, release the clutch, stay in the neutral position for a while, and then step on the clutch again. , put the block into another block. 

Messages

Submit